SPEED-RAIL® and NU-RAIL® FITTINGS

Designed to reduce initial installation and assembly time, as well as greatly simplify changes and additions to your existing/permanent pipe structure.

• Patented two-piece modular fittings. (All Speed-Rail II® designs are patented.)
• Easy maintenance and adaptability; can be installed anywhere along the length of the pipe; fittings can be easily added to existing structures.
• Designs are available in SRII that are not available anywhere else (18S, 22S and 28S).
• All caps and bodies within a given size are interchangeable; parts can be ordered as sets or as individual caps and bodies.
• Ideal for use in the construction of playground areas, sports complexes, schools, movie sets, government facilities, public works, etc. wherever there is a need for a retrofit.

Here are just a few of the numerous applications for which Safety Rail Systems are ideal:

• Industrial Plants
• Health & Medical Buildings
• Recreational Areas & Amusement Parks
• Government Facilities & Public Works
• Petroleum Refineries
• Warehouse Locations
• Handrails & Guardrails
• Many, Many More!

Features & Benefits

• High-strength aluminum/magnesium alloy
• Easy installation—slip-on, easy-to-assemble design requires minimal labor
• Thicker walls for extra strength
• Modular—can be easily disassembled and reconfigured at any time
• Versatile—can be used with any kind of pipe· Lightweight easy to handle
• Corrosion-resistant
• Virtually maintenance-free—no painting, welding or grinding required· Bright, attractive finish
• Non-magnetic and non-sparking—optional aluminum kit and stainless steel screws—safe for millions of installations
• Choice of burnished, anodized and powder coated finishes are available
• Featuring proprietary internal/external CarnCar knurled set screws
• Recyclable—salvageable
• Ideal for both new installations and retrofits
• Cost-efficient—saves both time and labor
• OSHA-, BOCA-, SBC- and UBC-compliant

Tamper-Resistant Set Screws To provide greater security to your safety system, Hollaender offers a wide range of Bumble Bee fitting products
	with optional tamper resistant set screws. This important Hollaender feature ensures increased protection and maximizes
protection and maximizes safety railing system integrity.

A.D.A. Railing System Hollaender's versatile hand railing
systems can be configured to meet all the requirements of the Americans with Disabilities Act.
Important design features include: Designed to allow easy, on-site, handrail fabrication on new construction, renovations and alterations. 1-1/2" clearance between handrail and post(s) or wall. An underslung, rounded configuration Id which creates a continuous gripping surface with no sharp edges or projections. A new A. D. A. #85 bracket that can be rotated to any angle for ramps or stairs.

Bumble Bee-Safety Rail®

Hollaender affords you a variety of options in specifying the proper Bumble Bee Safety Rail® system for your specific application. You can choose between three standard safety railing kits— Corner, Straight Section and Extension.

• Easy installation—low labor cost and fast
• Corrosion resistance—virtually maintenance free
• Lightweight—easy to handle· Recyclable—salvageable
• Non-magnetic and non-sparking—optional aluminum kit and stainless steel screws—safe for millions of installations
• OSHA- and BOCA-compliant

• Very easy to use; the only tools needed are a saw, hex key and tape measure.
• Cast from aluminum 535; utilizes the knurl cup set screw; fittings are "offset;" multiple pieces of pipe can pass each other in the fitting.
• Fittings can be supplied in standard burnished finish, powder coated or anodized; can be combined with any other Hollaender fitting system.
• Applications include: handrail, playgrounds, store fixtures, signage, racks, light and camera mounts, and any other imaginable structure.

Online-Catalog

• Slip-on design for easy assembly; minimal skill level needed for installer; the only tools needed are a saw, hex key and tape measure; no bolts, nuts, washers, adhesives or welding.
• All Speed-Rail® fittings are "in-line" and American made; includes knurled cup set screws.
• Precision-cast, high-strength, lightweight aluminum/magnesium alloy (ALMAG 535).
• Corrosion-resistant; low maintenance; nearly 100% salvageable and reusable.
• Applications include: handrail, playgrounds, store fixtures, signage, racks, light and camera mounts, and any other imaginable structure.

• Repair broken welded pipe without having to re-weld or replace it.
• Cast from aluminum 535.
• Utilize button-head socket cap screws.

• Rack systems fabricated with Rackmaster® fittings can be moved fully assembled without fear of the rack coming apart.
• All fittings are "off set," cast from aluminum 535, and designed specially to make custom rack fabrication quick and easy.
• Fittings can be supplied in standard burnished finish, powder coated or anodized; can be combined with any other Hollaender fitting system.
• Applications include heavy-duty rack systems, playgrounds, platforms, and any other structures subject to high loads.