The KeeGuard^® system has been independently tested and exceeds all relevant North American safety requirements

OSHA Standard 29 CFR 1910.23

OSHA Standard 29 CFR 1910.500
International Building Codes
British Columbia - National Building Code Sections 4.1.10.1(e), 4.1.10.1(2) and 4.1.10.1(4)
Manitoba - National Building Code Sections 4.1.10.1(e), 4.1.10.1(2) and 4.1.10.1(4)

Newfoundland & Labrador - National Building Code Sections 4.1.10.1(e), 4.1.10.1(2) and 4.1.10.1(4)

Nova Scotia - National Building Code Sections 4.1.10.1(e), 4.1.10.1(2) and 4.1.10.1(4)

Ontario - Ontario Building Code Sections 4.1.10.1(1)(b), 4.1.10.1(2) and 4.1.10.1(4)

Saskatchewan - National Building Code Sections 4.1.10.1(e), 4.1.10.1(2) and 4.1.10.1(4)

TÜV has tested the system to ensure compliance with the requirements of OSHA Standard 29 CFR 1910.23, HSE S.R. No. 15, BGV A1: 2000 and EN ISO 14122 Part 3.

All set screws should be tightened to the recommended 29 ft/lbs or 39 Nm during installation of the system.

It is recommended that periodic inspections are performed to ensure system integrity.